Educational Background

2006.09 – 2009.06, Jilin University, Mechanical Design and Theory, Doctor

2003.09 – 2006.06, Jilin University, Mechanical Design and Theory, Master

1999.09 – 2003.06, Jilin University, Mechanical Engineering, Bachelor

Professional Experience

2016.12 – present, Professor\Doctoral Tutor, Jilin University, School of Mechanical and Aerospace Engineering

2015.11 – 2016.11, Visiting Scholar, University of Manchester, School of Mechanical, Aeronautical and Civil Engineering

2014.09 – present, Postdoc, Jilin University, Key Laboratory of Engineering Bionics Ministry of Education

2011.09 – present, Associate Professor\Master Tutor, Jilin University, School of Mechanical and Aerospace Engineering

2010.03 – 2012.12, Postdoc, Hangzhou Forward Gearbox Group Co. LTD

2009.09 – 2011.09, Lecturer, Jilin University, School of Mechanical and Aerospace Engineering

Research Interests

Bionic Fluid Drive and Soft Robot

Bionic Health and Service Robot

Vehicle Hydraulic Transmission

Complex Flow and Heat Transfer Mechanism

Research Projects

2019-2022 National Key Research and Development Project of the Ministry of Science and Technology：Research on key technology and application of knee and ankle integrated bionic intelligent lower limb prosthesis .( 2018YFC2001303)

2019-2022 Key projects of the National Natural Science Foundation of China's Major Research programs: The principle and key technology of bipedal biped biped robot with bionic pull-compression body. (91848204)

2018-2022 The advanced bionic system project of the National Defense Science and Technology Innovation Special Zone of the CMC: Design and development of bionic spider robot system.

2017-2018 The advanced bionic system project of the National Defense Science and Technology Innovation Special Zone of the CMC: Research on high mobility bionic Spider robot. (1716312QJ12400101)

2017-2020 General Project of the National Natural Science Foundation of China: Research on the operation mechanism and driving mechanism of hydraulic drive of fishing spider and its bionic driving system. (51675219)

2018-2019 Joint Equipment Fund of the Ministry of Education: Development of fast maneuvering cross-medium intelligent bionic hydraulic drive system. (6141A02022614)

2017-2019 Key science and technology project of Jilin Science and Technology Department: The key technology of bionic super hydrophobic/super hydrophobic, drag reduction and multifunctional coupling design and preparation of flowing blade. (20170204066GX)

2015-2017 Ministry of Industry and Information Technology "Strong foundation plan" project: Development of automatic transmission shift control system for high power construction machinery.

2014-2016 Ministry of Science and Technology "863 Project" advanced manufacturing technology field subject project: The key technology for the whole life cycle design of earthmoving machinery powertrain. (2014AA041502)

2017-2019 Foundation of Key Laboratory of Road Construction Technology and Equipment, Ministry of Education, Chang 'an University: Research on the key technology of biomimetic super hydrophobic low adhesion blade for hydraulic torque Converter.

2016-2018 China Postdoctoral Science Foundation first - class grant.

2018-2019 Jilin Dongyuan Precision Machinery Co. LTD: Development of public service cloud platform in the smart industry Park.

2019-2020 Hangzhou Hongli Machinery Co. LTD: Film packaging automation equipment development(2019220101000218)

2018-2019 Hangzhou Shenfa Electric Co. LTD: Electrical material connection information system(2018220002000132)

2018-2019 Hangzhou Jie Brand Transmission Technology Co. LTD: Optimized design of "JRWXF01 Elevator Drive Main engine"(2018220002000284)

2019-2020 Zhejiang Zhongxin Electric Power Development Group Co. LTD:Intelligent cloud platform energy management and control software development(2020220002000056)

Selected Publications

1. Liu C, Liu Q, Jin R, et al. Mechanism analysis and durability evaluation of anti-icing property of superhydrophobic surface[J]. International Journal of Heat and Mass Transfer, 2020, 156:119768. IF=4.947

2. Liu C, Liu Q , Lin Z. Dynamical behavior of droplets transiently impacting on superhydrophobic microstructures[J]. PHYSICS of FLUIDS, 2020, 32（10）:103304. IF=3.515

3. Cai W, Li Y, Chunbao Liu. Comparative Study of Scale-resolving Simulations for Marine-Propeller Unsteady Flows[J]. International Communications in Heat and Mass Transfer, 2019, 100: 1-11. IF=4.127

4. Wang J, Ma W, Li X, Chunbao Liu et al. Slip theory-based numerical investigation of the fluid transport behavior on a surface with a biomimetic microstructure[J]. Engineering Applications of Computational Fluid Mechanics, 2019, 13(1): 609-622. IF=2.163

5. Chunbao Liu, Chen S, Sheng C, et al. The art of a hydraulic joint in a spider’s leg: modelling, computational fluid dynamics (CFD) simulation, and bio-inspired design[J]. Journal of Comparative Physiology A, 2019: 1-14. IF= 1.882

6. Chunbao Liu, Wang Y, Ren L, et al. A Review of Biological Fluid Power Systems and Their Potential Bionic Applications[J]. Journal of Bionic Engineering, 2019, 16(3): 367-399. IF=2.463

7. Chunbao Liu, Zhu L, Li J, et al. Fabrication of superhydrophobic bionic surface integrating with VOF simulation studies of liquid drop impacting[J]. Microscopy research and technique, 2019, 82(5): 615-623. IF=1.327

8. Tan Y, Li J, Li Y, Chunbao Liu et al. Improved Performance Prediction of Marine Propeller: Numerical Investigation and Experimental Verification[J]. Mathematical Problems in Engineering, 2019, 2019. IF=1.179

9. Sun J, Liu Q, Liang Y, Chunbao Liu et al. Three-dimensional VOF simulation of droplet impacting on a superhydrophobic surface[J]. Bio-Design and Manufacturing, 2019, 2(1): 10-23. ESCI

10. Bu W, Shen G, Qiu H, Chunbao Liu,Investigation on the dynamic influence of thermophysical properties of transmission medium on the internal flow field for hydraulic retarder; International Journal of Heat and Mass Transfer; 126: 1367-1376. 2018, IF=3.981

11. Zhihui Qian,Mingming Yang,Liang Zhou,Jing Liu,Riaz Akhtar, Chunbao Liu ,Yan Liu,Luquan Ren,Lei Ren,Structure, mechanical properties and surface morphology of the snapping shrimp claw;Journal of Materials Science;15； 10666-10678; 2018, IF=2.993

12. Chubao Liu , Chuang Sheng, Hualong Yang ,Zhe Yuan, Design and Optimization of Bionic Janus Blade in Hydraulic Torque Converter for Drag Reduction；Journal of Bionic Engineering;1;160-172; 2018，IF=2.325

13. Chunbao Liu, Li J, Bu W, et al. Large eddy simulation for improvement of performance estimation and turbulent flow analysis in a hydrodynamic torque converter；Engineering Applications of Computational Fluid Mechanics；12(1): 635-651; 2018, IF=1.918

14. Chunbao Liu  , Ling Zhu, Weiyang Bu , Yunhong Liang,Superhydrophobic surfaces: From nature to biomimetic through VOF simulation;Micron;94-100; 2018, IF=1.728

15. Zhao Q, Lin Z, Liang Y, Chunbao Liu ，Zhihui Zhang Zhenglei Yu Luquan Ren. , Microstructure characteristics and mechanical properties of Meretrix lusoria shell; Microscopy research and technique； 2018, IF=1.087

16. Liu Chun-bao, Chen Shan-shi, Sheng Chuang, Qian Zhi-hui, Ren Lu-quan, Ren Lei. Bionic hydraulic driving mechanism of spider and its bio-inspiration. Journal of Jilin University (Engineering and Technology Edition)

17. Chunbao Liu ,Weiyang Bu, Dong Xu, Multi-objective shape optimization of a plate-fin heat exchanger using CFD and multi-objective genetic algorithm ;International Journal of Heat and Mass Transfer;65-82; 2017, IF=3.981

18. Chunbao Liu ,Weiyang Bu, Tongjian Wang, Numerical investigation on effects of themophysical properties on fluid flow in hydraulic retarder; International Journal of Heat and Mass Transfer;1146-1158; 2017, IF=3.981

19. Chunbao Liu , Weiyang Bu, Dong Xu ,Yulong Lei , Xuesong Li, Application of Hybrid RANS/LES turbulence models in rotor-stator fluid machinery A comparative study; International Journal of Numerical Methods for Heat & Fluid Flow;12;2717-2743; 2017, IF=2.450

20. Chunbao Liu, Zhixuan Xu ,Wenxing Ma ,Songlin Wang, CFD investigating medium temperature influences on performance prediction and structure stress calculation in hydrodynamic torque converter;Numerical Heat Transfer Part A:Applications;7;563-578; 2017, IF=2.450

21. Wei C , Yuan L , Xingzhong L , Chunbao Liu. Numerical Investigation of Fluid Flow and Performance Prediction in a Fluid Coupling Using Large Eddy Simulation. International Journal of Rotating Machinery, 2017

22. Ma Wenxing, Liu Hao, Liu Chunbao. Dual-mode variable speed constant frequency control of wind turbines with hydrodynamic speed control [J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2017(3).

23. Ma Wen-xing, Liu Hao, Liu Chun-bao. Characteristic Analysis of Drive System of Wind Turbines with Hydrodynamic Speed Regulation[J]. Journal of South China University of Technology(Natural Science Edition), 2017(5).

24. Liu Chun-bao, Li Jing, Xu Dong. Simulation on the Lock-up Process of Hydraulic Torque Converter and Analysis on the Thermo-solid Coupling on Different Frictional[J]. Hydraulics Pneumatics & Seals, 2017, 37(12):1-4.

25. Chunbao Liu, Li Li, Yulong Lei,Changsuo Liu, Yubo Zhang, Drag reduction and performance improvement of hydraulic torque converters with multiple biological characteristics; Applied Bionics and Biomechanics;1;3641-3651; 2016, IF=1.769

26. Ma Wen-xing, Ge Lin-shan, Liu Chun-bao, et al. Optimization of the Hydraulic Retarder Control System Based on Joint Simulation of Dynamic Liquid-Filled Process[J]. Transactions of Beijing lnstitute of Technology, 2016, 36(1):1-7.

27. Ma Wen-xing, Ji Long-fei, Xu Wen, Liu Chun-bao. Design and Analysis of Double-Impeller Torque Converter with Continuously Variable Capacity[J]. Journal of South China University of Technology(Natural Science Edition), 2016, 44(3):36-43.

28. Ma Wen-xing, Liu Hao, Liu Chun-bao. Flow Filed Simulation and PTV Verification of the Hydrodynamic Torque Converter with Adjustable Guide Vanes[J]. JOURNAL OF NORTHEASTERN UNIVERSITY(NATURAL SCIENCE), 2016, 37(3).

29. Liu Chun-bao, Liu Chang-suo, Ma Wen-xing, et al. Circulation Distribution of Bionic Blades from Hydraulic Torque Converter Based on Fish Bodies[J]. Transactions of Beijing lnstitute of Technology, 2016, 36(9).

30. Yuan Zhe, Zhou Qian-qian, Liu Chun-bao, et al. Blade design and aerodynamics of MW wind turbine based on BEM theory[J]. Journal of Jilin University(Engineering and Technology Edition), 2016, 46(4).

31. Yuan Zhe, Xu Dong, Liu Chun-bao, et al. Strength analysis of hydraulic retarder blade based on the process of thermal-fluid structure interaction[J]. Journal of Jilin University(Engineering and Technology Edition), 2016, 46(5).

32. Chunbao Liu Dong Xu, Wenxing Ma, Zhe Yuan , Xuesong Li, Analysis of Unsteady Rotor-Stator Flow with Variable viscosity Based on Experiments and CFD Simulations; Numerical Heat Transfer,PartA:Application;12;1351-1361; 2015, IF=2.409

33. Chunbao Liu ,Changsuo Liu, Wenxing Ma, Rans,detached Eddy simulation and large Eddy simulation of internal Torque converters flows:A comparative study; Engineering Applications of Computational Fluid Mechanics;1;114-125; 2015, IF=1.918

34. Chunbao Liu, Liu C, Ma W. ,Mathematical Model for Elliptic Torus of Automotive Torque Converter and Fundamental Analysis of Its Effect on Performance ; Mathematical Problems in Engineering;2015, IF=1.145

35. Chunbao Liu, Linshan G, Wenxing M, et al , Multi-objective Optimization Design of Double-Row Blades Hydraulic Retarder with Surrogate Model;Advances in Mechanical Engineering； 2015, IF=0.848

36. Chunbao Liu; Tan, Y; Ma, W.X; et al. Die compensation method of hydraulic torque converter blade based on forming simulation and spring-back prediction. Materials Research Innovations, 2015, IF=0.83

37. Chunbao Liu , Bosen C , Changsuo L , et al.Research on mechanism of drag reduction and efficiency improvement of hydrodynamic torque converter with bionic non-smooth surfaces[C]// International Conference on Fluid Power & Mechatronics. IEEE, 2015.

38. Chai Bosen, Wang Yujian, Chunbao Liu, et al. Test and analysis of internal flow field in turbine of hydrodynamic torque converter based on particle image velocimetry[J]. Chinese Society of Agricultural Engineering, 2015, 31(12):92-98…

Courses

1. Thermal fluid engineering I, 32 credit hour, 2 credits

2. Mechanical system design, 50 credit hour, 3 credits

3. Principles and techniques of intelligent design, 40 credit hour, 2 credits

4. Fluid numerical simulation and engineering applications, 40 credit hour, 2 credits

5. Base for cross-scale simulation, 40 credit hour, 2 credits

Patents and Applications

1. Bionic intelligent ultrasonic inspection body position changing device,

CN202010635395.8, China（published）

2. Multifunctional posture conversion nursing bed device, CN202010469706.8, China（published）

3. Active and passive hybrid hydraulic drive ankle joint prosthesis and drive method and application, CN202010395261.3, China（published）

4. Active and passive hybrid hydraulic knee joint prosthesis and its control method and application, CN202010288228.0, China（published）

5. Hydraulic test bench and method for testing performance of bionic skeletal muscle driver, CN201910823351.5, China（published）

6. Integrated bionic skeletal muscle driver and preparation method thereof, CN201910664279.6, China（published）

7. Active and passive combined prosthetic knee-ankle joint hydraulic circuit with energy recovery function, CN201910794721.7, China（published）

8. Hydraulic flexible bionic fish and working method thereof, CN201910659014.7, China（published）

9. A design method of hydraulic torque converter blade based on NASA airfoil system, CN201910460253.X, China（published）

10. Subdivided step type power loss self-locking hinge mechanis, CN201910448722.6, China（published）

11. Separate testing device for internal flow field of hydraulic torque converter, CN201410306106.4, China（authorized）

12. Particle image velocity measurement test device for testing the internal flow field of retarder, CN201410351177.6, China（authorized）

13. Closed double cavity double row blade hydraulic retarder, CN201410331143.0, China（authorized）

14. Particle image velocity measurement test device for internal flow field of stator impeller, CN201410351180.8, China（authorized）

15. Bionic blades of double-turbine hydraulic torque converter guide wheel, CN201410040097.9, China（authorized）

Other Professional Activities

2019 Member, Fluid Transmission and Control Branch, Chinese Society of Mechanical Engineering

2018 Hangzhou "Qianjiang Scholar" special expert

2018 Director, Shanghai Rehabilitation AIDS and elderly well-being Industrial Technology Innovation Strategic Alliance

2018 Senior member, Chinese Society of Mechanical Engineering

2017 Member , the International Bionic Engineering Society

Honors and Awards

2020 The 16th group of experts enjoying government subsidy in Jilin Province (provincial experts with outstanding contributions)

2020 Science and Technology Progress Award of Jilin Province First prize

2019 Science and Technology Award of China Machinery Industry Association Second Prize of Scientific and Technological Progress

2015 College of Mechanical Science and Engineering, Jilin University, Excellent tutor for graduate students

2014 College of Mechanical Science and Engineering, Jilin University, Excellent tutor for graduate students